Hardware Integration ==================== Interface Options ----------------- The AREA65 module supports four communication interfaces that can operate simultaneously. Connector Pinout ---------------- .. image:: hardware_interfaces.webp :alt: Hardware Interfaces The AREA65 module features the following hardware interfaces: +---+-------------+---------------------------------------------+ | # | Interface | Description | +===+=============+=============================================+ | 1 | 4G SMA | 4G cellular antenna connector | +---+-------------+---------------------------------------------+ | 2 | GPS SMA | GPS antenna connector | +---+-------------+---------------------------------------------+ | 3 | CAN | CAN 2.0 bus interface | +---+-------------+---------------------------------------------+ | 4 | Nano SIM | Nano SIM card slot for cellular connectivity| +---+-------------+---------------------------------------------+ | 5 | SPI | SPI interface (3.3V TTL) | +---+-------------+---------------------------------------------+ | 6 | I2C | I2C interface (3.3V TTL) | +---+-------------+---------------------------------------------+ | 7 | UART | UART interface (TTL, 5V) | +---+-------------+---------------------------------------------+ | 8 | USB-C | USB-C connector for power and data | +---+-------------+---------------------------------------------+ | 9 | MicroSD | MicroSD card slot for data logging | +---+-------------+---------------------------------------------+ UART ^^^^ +-----+----------+ | Pin | Function | +=====+==========+ | GND | Ground | +-----+----------+ | 5V | 5V Power | +-----+----------+ | TX | Transmit | +-----+----------+ | RX | Receive | +-----+----------+ **Baud Rate:** 57600 (fixed) **Voltage:** 5.0V TTL CAN 2.0 ^^^^^^^ +---------+----------+ | Pin | Function | +=========+==========+ | GND | Ground | +---------+----------+ | 5V | 5V Power | +---------+----------+ | CANL | CAN Low | +---------+----------+ | CANH | CAN High | +---------+----------+ **Protocol:** CAN 2.0A/B **Speed:** Configurable SPI ^^^ +------+---------------------+ | Pin | Function | +======+=====================+ | MOSI | Master Out Slave In | +------+---------------------+ | MISO | Master In Slave Out | +------+---------------------+ | SCK | Serial Clock | +------+---------------------+ | CS | Chip Select | +------+---------------------+ | GND | Ground | +------+---------------------+ | 5V | 5V Power | +------+---------------------+ **Voltage:** 3.3V TTL I2C ^^^ +-----+-------------+ | Pin | Function | +=====+=============+ | GND | Ground | +-----+-------------+ | 5V | 5V Power | +-----+-------------+ | SCL | Serial Clock| +-----+-------------+ | SDA | Serial Data | +-----+-------------+ **Voltage:** 3.3V TTL **Address:** Configurable Power Requirements ------------------ +-----------+-------------------------+ | Parameter | Value | +===========+=========================+ | Voltage | 5V DC | +-----------+-------------------------+ | Current | 1A minimum | +-----------+-------------------------+ | Connector | USB-C or interface pins | +-----------+-------------------------+ Mechanical Dimensions --------------------- +----------------+-------------------------+ | Dimension | Value (mm) | +================+=========================+ | Length | 78 | +----------------+-------------------------+ | Width | 57 | +----------------+-------------------------+ | Height | 24 | +----------------+-------------------------+ | Weight | 45g | +----------------+-------------------------+ | Mounting Holes | 2x Ø3.3mm through holes | +----------------+-------------------------+